TOBD5-63 RCBO 1P+N is applicable to electric circuits with rated voltage 230V AC, frequency 50/60Hz and rated current up to 63Amp.
The RCBO provides indirect protection to the operator’s body under such situation that the exposed live parts should be connected to a proper earth pole.
RCBO also provides overcurrent protection to circuits in household, commercial and other similar installations. Moreover, it prevents potential fire danger caused by earth fault current in case overcurrent protection device fails.
RCBO 1P+N Speciasl Tip
1.RCBO with rated sensitivity up to 30mA could beused as supplementary protecting device in case other protecting device faikls its protection against electric shock.
2.RCBO is specially designed for home installation and other similar applications, non-professional operation, no maintenance.
3.RCBO cannot prevent electric shock caused by direct contact between two protected circuits or leakage current between the two circuits.
4.It is recommended to install special equipment such as surge protectors and lightning arresters on the upstream line of the RCBO to prevent potential surge voltage and current from appearing on the power input side.
5.RCBO overcurrent protection value is fixed and is not subject to further adjustment.
|Residual Current characteristic:||AC|
|Rated voltage||240V AC|
|Rated residual operating current |△(A):||0.03|
|Rated residual non operating current |△ no:||0.5|△ n|
|Rated conditional short-circuit current inc:||6kA|
|Rated conditional residual short-circuit current |△c:||6kA|
|Tripping duration:||Instantaneous tripping ≤0.1s|
|Residual tripping current range:||0.5||△n~|△n|
|Electro-mechanical endurance||≥4000 cycles|
|Connection capacity:||RIGID CONDUCTOR 16MM²|
|Connection terminal||Screw terminal Pillar terminal with clamp|
|Fastening torque||2.0 Nm|
|Installation||On symmetrical DIN rail 35mm Panel mounting|